Instruction manual

RXT Wireless Configuration Tool
RXT WCT Instruction Manual Rev 0.0 Page 24 of 33
Figure 31 RXT 1 700 Sensor
Add RXT for Sensor 2
9. Select the RXT Name field and enter “RXT 2_100 Sensor” for the second RXT.
a. Enter 00.85.3A as its Unique Device ID.
b. Select the Slave Device button since it will function as a slave device with a sensor attached.
This button will turn red to indicate it has been selected.
c. Select the Battery Attached button in the Alarm Stations/Battery section since it will be
powered by a Detcon battery pack. This button will turn red to indicate it has been selected.
d. Set the the Low Battery Alarm value to 3 days.
e. Select the Associated Zones button and select both zones 1 and 2 from the list.
f. Select the Done button to save selection and exit the Associated Zones screen.
g. Configure the alarm events and properties accordingly per section
0 if needed. In our
example, the default settings will not be changed.
h. Once the configuration of RXT 2 is complete, select the Save RXT button to save the
configuration settings for the RXT. The RXT section will increment to the next RXT to be
configured by the user.
Figure 32 RXT 2 100 Sensor