Instruction manual

RXT Wireless Configuration Tool
RXT WCT Instruction Manual Rev 0.0 Page 20 of 33
will list the results, if any, in the RXTs in My Network section. For example, in the figure
below, the RXT WTC initialized to the current RF channel 3 and network ID 3. Eight RXT-
320s were found in this wireless network and listed in the RXTs in MY Network section.
Figure 27 RXT-320 Wireless Network Screen
NOTE: The search can be canceled at anytime by selecting the Cancel button if the RXTs
being found are not relevant to the user.
5. Change the WCT’s current Channel/Network ID (3/3) to the new current wireless network (10/10) the
RXT-320s need to reside in. Selecting the Net ID and Channel fields will activate a virtual keypad
that can be used to change these values accordingly. For our example, the current Channel/Network
ID was changed from 3/3 to 10/10 which will now be the new current wireless network.
Figure 28 RXT-320 Wireless Network Screen