Instruction manual

RXT Wireless Configuration Tool
RXT WCT Instruction Manual Rev 0.0 Page 17 of 33
3.5.6 Monitor Network
The Monitor Network function provides the user a scrollable window to see network communication as time-
stamped logged events.
Figure 23 Monitor Network Window
3.5.7 Network Activity
The Network Activity section gives a visual representation of the activity of the current network selected.
Two virtual LEDs are used to represent activity and sleep on the network. This section also indicates which
RXT transceiver is designated as the master by displaying the transceivers serial number.
Figure 24 Network Activity Section
3.6 File Manager
The File Manager screen is selected from the main configuration tool screen and is used to move, copy or
delete files between the WCT’s internal file storage and an external storage device such as a USB DRIVE.
Generally, this screen will not be used. It supports three different file types, RXT-300 configuration files,
RXT Software Updates (RXT Scripts) and RXT WCT Log Files. The software updates would be obtained
from the Detcon factory and used to update the RXT’s software. The WCT Log Files are log files that log
different activity when the RXT WCT is in use. This includes info such as initializing the RXT WCT or
moving RXTs to a different network.
NOTE: The RXT-300 file type is only available for the RXT-300 configuration tool and not
for the RXT-320 configuration tool.