Instruction manual

RXT Wireless Configuration Tool
RXT WCT Instruction Manual Rev 0.0 Page 15 of 33
3.5.4.2 Operations
The Operations section has two operations available as defined below:
Search Searches for RXTs determined by Search Channels. Results are listed in RXTs Found.
Move to My Network Moves RXTs that have been selected in RXTs Found list to My Network.
Figure 20 Operations Section
Move to My Network operation is used to move RXTs that have been selected in the RXTs Found list to the RF
Channel/Network ID as set in the My Network on the Wireless Network screen. The user will need to set the
My Network Channel and Network ID before to performing the move.
3.5.4.3 RXTs Found
The RXTs Found section will list the RXTs found by the Search operation. Many of the functions are similar
to those related to the RXTs In My Network list on the Wireless Network screen. The most important
difference is the list of RXTs will NOT be limited to just one wireless network. It can include RXTs on any
network depending on the searches performed by the user. The RXTs Found list will be populated with RXTs
that respond and will show the Network Address, Channel and Network ID of each RXT found.
Figure 21 RXTs Found Section