Owner manual

1.0 INTRODUCTION
The Detcon Model 110A-FB gas detection system consists of 2 major assemblies:
1. The NEMA 4 fiberglass control enclosure.
2. The remote mount gas sensor assemblies.
The NEMA 4 fiberglass control enclosure is detailed in section 1.0 of the manual and any applicable sensor
assemblies are detailed in section 3.0. Because the 110A-FB incorporates a non-modular control circuit,
there is no section 2 in this manual.
Detcon Model 110A-FB Gas Detection System PG.2
HIGH
LOW
FAULT
MODEL 110A-FB
ppm / %
SPECIFIC
GAS
MONITOR
HIGH
ALARM
SET
LOW
ALARM
SET
HIGH
ALARM
LOW
ALARM
NL
NL
detcon inc.
TEXASHOUSTON