Instruction manual

Odometers:
Walkstation keeps track of your total distance walked and estimated
calories burned. It does so in three ways:
• Normal Accumulation in the Display: While you are walking, the display
shows distance and calories. If you pull the Magnetic Safety Clip or press
and hold the STOP key to reset the Walkstation, the distance and calories
will reset.
• Session Odometer: You may want to stop using the Walkstation many times
each day but still want to keep track of your distance and calories for that day
(or that week). The session odometer will work for this purpose. It will not reset
accumulated distance and calories. To view the session odometer, while the
Walkstation is running, press the ENTER key. To clear the session odometer,
while the Walkstation is running, press and hold the ENTER key.
• Overall Odometer: Walkstation also has an overall odometer, which you
may want to use for longer periods of time such as several months.
To view the overall odometer, while Walkstation is prompting for weight
such as at the beginning of a session, press the STOP and keys simultaneously.
To clear the overall odometer, while Walkstation is prompting for weight, press
the STOP and and keys simultaneously.
For Private Use:
The treadmill ships in “Public Use” mode allowing the weight to return to the
default after each use. To save the weight and set for “Private Use”, follow these
steps to enter Engineering Mode: (It may be easier if you have 2 people.)
STEP 1: Turn off the treadmill
STEP 2: Press and hold STOP, SPEED - , & SPEED +
STEP 3: While still holding the buttons have someone else turn the treadmill
back on. It may take a couple seconds, but display will read
“ENGINEERING MODE”
STEP 4: Press ENTER twice or until display reads “WEIGHT 150”
STEP 5: Press SPEED + to toggle the to read “WEIGHT SAVED”
STEP 6: Press START to save the change. Screen will read “SAVED”
STEP 7: Press STOP to exit ENGINEERING MODE.
After completing these steps, the treadmill will be back in Normal Operation
Mode. The next time the user enters a weight, it will be saved for each use.
–+
+
W A L K S T A T I O N U S E R I N S T R U C T I O N S 9