Replacement Part List

QUICK START AND TROUBLE SHOOTING GUIDE
QUICK START SETUP
• ADD 10W30 OIL TO ENGINE
• ADD GAS
• SAFTETY CHECK AREA AND USE SAFETY GLASSES, GLOVES, EAR PROTECTION
• TURN KEY ON
• HALF THROTTLE (CHOKE OPTIONAL FOR COLD STARTS)
• PULL START THE ENGINE
TRENCHING
• SET THE FORWARD WHEEL BRAKE BAR
• SET CHAIN TO DESIRED DEPTH
• TIP CHAIN OFF THE GROUND AND PULL START THE ENGINE
• THROTTLE ENGINE ON HIGHEST SPEED
• LOWER TRENCHER CHAIN SLOWLEY INTO GROUND FOR FIRST CUT
• PULL TRENCHER BACKWARD AS IT TRENCHES AND THE AUGER REMOVES DIRT
TROUBLE SHOOTING
• ENGINE WONT START
• TURN KEY ON – CHECK ENGINE OIL LEVEL - CHECK GAS LEVEL
• UNPLUG KEY SWITCH – IF ENGINE STARTS REPLACE THE KEY SWITCH.
• FOLLOW YOUR ENGINE MANUAL FOR FURTHER TROUBLE SHOOTING.
• UNIT VIBRATES
• CHECK YOUR CHAIN FOR MISSING TEETH OR LOOSE DIGGER CLEATS.
• CHECK YOUR CHAIN AND AUGER FOR OBSTRUCTIONS.
• YOU MAY BE INTO A BIG BURIED ROCK OR TREE ROOT SO INSPECT THE
TRENCH.