Use and Care Manual

Part III: Operating The Log Splitter 
10 
1.  Place the log on the Log Splitter. Grasp the log on the sides near the middle of the block. 
Center the log, side-to-side, on the rail of the Log Splitter, making sure that one end is 
against the Splitting Wedge. 
2.  With one hand on the Lever and the other hand push the start ball, and then pull the 
handle  lever  to the “SPLIT”,  and then take away  your  hands as  soon as  possible, 
otherwise the  handle lever  will hit your hands when it is retracted from  “SPLIT” to 
“AUTO-RETRACT”. 










