Use and Care Manual

PartI:GeneralSafetyRules

3



WARNING
ReadthisSafety&OperatingInstructionsmanualbeforeyouusetheWoodChipper.Become
familiarwiththeoperationandservicerecommendationstoensurethebestperformanceof
yourmachine.

Propose
CAUTION
This machine is designed solely to chip wood and must not be used for any other purpose.
It should only be used by trained operators who are familiar with the content of this manual.
It is potentially hazardous to fit or use any parts other than your dealer parts. The company
disclaims all liability for the consequences of such use, which in addition voids the machine
warranty.



Beforeusingthewoodchipper
NOTICE
A． Operators must be fully trained before using this machine.
B． User Manual is read and understood.
C． Machine is positioned on level ground; all guards are fitted and in good condition.
D． Blades are in good condition and secure. All blades are sharpened or replaced in sets.
E． All fasteners are checked for tightness.
F． Only WOODEN materials free of nails etc. are fed into the machine.
G． Emergency stop wire is rightly connected and the switch is functional.
H． Fire extinguisher is available on site.

Whenusingthewoodchipper
NOTICE
A. Alwaysfeedfromtheside.NEVERSTANDDIRECTLYINFRONTOFTHEFEEDCHUTE
B. Itisbettertohaveasecondtrainedoperatorwithineasyreachofthemachine.
C. Maintainstrictdisciplineatalltimesandservicemachineatspecifiedperiods.
D. Note direction of discharge chute and
 if necessary, note the wind direction to prevent
debrisfrombeingblownintounsafeareasorwhereitcouldaffectmembersofthepublic.
E. DONOTputanypartofyourbodyintothein‐feedchutewhilethemachineisrunning.
F. DONOToperatethemachinewhile
undertheinfluenceofalcoholordrugs.