Operating Guide

QUICK START AND TROUBLE SHOOTING GUIDE
QUICK START SETUP
• ADD 10W30 OIL TO ENGINE
• ADD GAS
• PIN BOTH WHEELS INTO PIVOT BRAKE HOLES.
• TURN KEY ON
• HALF THROTTLE (CHOKE OPTIONAL FOR COLD STARTS)
• PULL START THE ENGINE
TREE CHIPPING
• ENGINE ON HIGHEST SPEED
• FEED SMALLER TREES INTO CHUTE AND LET GO, TREE WILL AUTO FEED.
• FEED LARGER TREES SLOWLY ALLOW CUTTER WHEEL TO REGAIN RPM SPEED
BETWEEN CUTS.
• FEED LEAVES, TWIGS AND UPTO 1 INCH DIA TREES INTO TOP HOPPER.
TROUBLE SHOOTING
• ENGINE WONT START
• TURN KEY ON – CHECK ENGINE OIL LEVEL - CHECK GAS LEVEL
• UNPLUG KEY SWITCH – IF ENGINE STARTS REPLACE THE KEY SWITCH.
• FOLLOW YOUR ENGINE MANUAL FOR FURTHER TROUBLE SHOOTING.
• UNIT VIBRATES
• CHECK YOUR CHIPPER FOR MISSING OR LOOSE BLADES.
• CHECK YOUR CHIPPER WHEEL IS NOT OBSTRUCTED AND FREELY TURNS.