Manualshelf

Use and Care Manual

ManualsBrandsDetail K2 ManualsOutdoor Power EquipmentEverest 90 in. x 22 in. Fully Hydraulic Snow Plow Kit (Universal Fit, Custom Mount Sold Separately)
12345678910
En.10 DK2 Everest R-3 man.
ENGLISH
INSTALLATION STEPS
Step 4 – Connect the main power hand held control.
Insert the large blue or red plug on the main power cord running from the baƩery into the maƟng
plug on the passenger’s side of the liŌ link arm. Insert the handheld control plug into the matching
rubber molded receptacle. Route the control wire up over the hood, under the driver’s side
windshield wiper arm, around the driver’s side mirror and in through the window. IMPORTANT!
Make sure to leave slack in both cables spanning from the vehicle to the snowplow control box.
This allows the cables to free ŇŽat when the snowplow is in use; if they are ƟŐht they may become
undone or damaged.
Visit the following YouTube links for addiƟon hints
hƩps://youtu.be/rt19JmU0r0A
hƩps://youtu.be/-U0VyedQ41Q