Model: Everest R-3 DETAIL K2 INC. DK2 Snow Plow Instruction manual STOP! Questions, problems, missing parts? Do not return to your retailer. Please call our customer service department at: 2XU FXVWRPHU VHUYLFH VWDႇ DUH UHDG\ WR SURYLGH assistance. If a part is damaged or missing, replacement parts can be shipped from our facility. For immediate help with assembly, or for additional product information, call our North American toll-free number: 1(888) 277-6960.
ENGLISH TABLE OF CONTENTS THANK YOU FOR PURCHASING A DK2 PLOW! .............. EN.2 IMPORTANT SAFE OPERATING PRACTICES .................. EN.3 CALIFORNIA PROPOSITION 65 ......................................... EN.3 GENERAL............................................................................... EN.3 PERSONAL SAFETY ............................................................ EN.3 SNOW PLOW ......................................................................... EN.4 VEHICLE .........................
IMPORTANT SAFE OPERATING PRACTICES CAUTION: SAFETY FIRST— Read this manual carefully before operating your Snow Plow. We recommend that you read this manual completely so that you are fully aware of all important safety recommendations. Record your serial number. DANGER: This equipment was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury.
ENGLISH IMPORTANT SAFE OPERATING PRACTICES 2. Make it a practice to completely lower the blade to the ground every time the vehicle is parked. A raised blade may drop unexpectedly and this can result in serious personal injury. WARNING! When mounting or removing the Snow Plow, keep hands and feet clear of the blade, mounting assembly and winch.
IMPORTANT SAFE OPERATING PRACTICES CAUTION: The installation of a Snow Plow may have a bearing on the warranty for your vehicle. For more information, please carefully consult your vehicle’s owner’s manual or your vehicle dealer. 7. The sudden jarring stop incurred when hitting hidden obstacles in the snow could trigger release of your vehicle’s airbags. Consult your vehicle manual or your vehicle dealer to mitigate this. 8.
ENGLISH IMPORTANT SAFE OPERATING PRACTICES OPERATING SAFETY 1. Keep bystanders, helpers, pets and children at least 8 metres (25 feet) from the plow while it is in operation. Stop using it if anyone enters the area. Never allow children to operate it. 2. Never allow anyone to ride on the plow in operation. Sitting on it may lead to serious injury. 3. Do not overload plow capacity by attempting to clear snow at too fast a rate. 4. Never operate this machine without good visibility or light.
SPECIFICATIONS ENGLISH z z z z z Easy attachment: slides into your custom mount Electric winch with wired remote control for easy up and down snow control 3 locking angles: to either side or straight ahead Steel construction powder coated with UV-protected paint Castors allow attachment and removal in seconds, plus roll-away storage VEHICLE REQUIREMENTS WARNING! Always inspect Snow Plow components, connections, and fasteners for wear or damage every time you attach or detach the Snow Plow.
ENGLISH INSTALLATION STEPS Pre-InstallaƟon The InstallaƟon should be completed on an asphalt/concrete surface, with suĸĐient area to work. Unpackage your new FRISTTRAX Snowplow, discard all shipping materials, recycle if possible. Once the plow is un-packaged, slowly roll the plow from its upright shipping conĮguƌĂƟon over onto the built-in cart. Top up the oil reservoir to ƚŚĞ Įůů ůine indicated with the 1L of hydraulic oil provided. Your new FIRSTTRAX Snowplow is now ready to be installed.
INSTALLATION STEPS ENGLISH Step 3 – AƩaching the snowplow to the vehicle. Roll the plow to the front of your vehicle. The channel on the snowplow liŌ frame is to Įƚ around the cross bar on the mount. Helpful hint…have the channel which is to slide over the front cross bar parallel to the ground. To alter placement simply push or pull on the top linkage which will allow you to change the current resƟng place.
ENGLISH INSTALLATION STEPS Step 4 – Connect the main power hand held control. Insert the large blue or red plug on the main power cord running from the baƩery into the maƟng plug on the passenger’s side of the liŌ link arm. Insert the handheld control plug into the matching rubber molded receptacle. Route the control wire up over the hood, under the driver’s side windshield wiper arm, around the driver’s side mirror and in through the window.
TROUBLESHOOTING ENGLISH Plow is not funcƟoning: 1. ConĮrm the main power and control wire plugs are clean and properly connected 2. ConĮrm the control wire is properly connected to the hand held control. 3. ConĮrm that the main power inline breaker was not accidently tripped. Press the red buƩon on top and push the trip wing back in to reset Not the Įrst three… 4.
ENGLISH TROUBLESHOOTING B - If the plow did not operate during the jumper test, check the small 10amp in line fuse down by the pump motor. If the fuse is ok remove the pump guard and with the use of a voltage tester conĮƌŵ that there is 12volts on the main terminal where the red power lead is connected on the solenoid. If there is 12V supply try the next test to see if the control wire is defecƟve. Remove the cap on the main power feed and the green control wire from the solenoid.
ADJUSTMENTS If you are leaving the snowplow aƩached to a vehicle make sure rocker switch is in the middle poƐŝƟon on your hand held control when parked. If it is lĞŌ ŝŶ the down (oƌ Ňoat mode) poƐŝƟon it will conƟŶue to consume power and eventually drain your baƩery Skid Shoe Adjustment With the use of two 1-1/8 open end wrenches loosen the jam nuts, adjust to desired height and reƟghten v.190915 En.
SCHEMATIC DRAWING ENGLISH 20 19 23 13 2 6 5 3 18 28 22 12 11 7 14 8 4 25 24 10 1 15 7 21 9 26 ITEM NO. PART NUMBER QTY. ITEM NO. PART NUMBER QTY. ITEM NO. PART NUMBER 1 8804 1 11 8839 1 21 HH-0750-6500-Z 1 2 8808-R1 1 12 8886 AF 1 22 NIN-0375-Z 2 3 8809 1 13 8890 1 23 NIN-0500-Z 4 4 8810 1 14 8891 2 24 NIN-0750-Z 2 5 8811-R3 1 15 8899 1 25 Mirror8811-R3 1 16 FW-0500-Z 2 PIN-10006000-Z 2 6 7 8813 2 17 FW 0.
ENGLISH APPENDIX 1 Standard Steel Bolt Torque Specifications Standard Dry Torque in Foot-Pounds SAE SAE Grade Grade 3 0-1-2 100,000 psi 74,000 psi Med. Carbon Low Carbon Steel Steel SAE Grade 5 120,000 psi Med. Carbon Heat T. Steel SAE SAE SAE Grade 6 Grade 7 Grade 8 133,000 psi 133,000 psi 150,000 psi Med. Carbon Med. Carbon Med. Carbon Temp. Steel Alloy Steel Alloy Steel Bolt Size (in.) Coarse Threads/ inch 1/4 20 6 9 10 12.
APPENDIX 2 ENGLISH Metric Steel Bolts Torque Specifications Standard Dry Torque in Foot-Pounds Bolt Size Millimeters Coarse Thread Pitch 6mm Standard 5D 71,160 psi Med. Carbon Steel Standard 8G 113,800 psi Med. Carbon Steel Standard 10K 142,000 psi Med. Carbon Steel Standard 12K 170,674 psi Med. Carbon Steel 1.00 5 6 8 10 8mm 1.00 10 16 22 27 10mm 1.25 31 40 45 49 12mm 1.25 34 54 70 86 14mm 1.25 55 89 117 137 16mm 2.00 83 132 175 208 18mm 2.
