Replacement Part List

En.14 DK2 Everest R-3 man.
ENGLISH
ADJUSTMENTS
Drop Speed
To adjust the drop speed of the blade when lowering loosen the 11/16 jam nut on the valve located at
the front of the pump block below the down valve, adjust with  screw driver and re ghten the jam
nut. Turn clockwise to reduce drop speed, counter clockwise to increase drop speed. A half turn will
change speed considerably
Angling Direcon Switch
If you wish to change the opon of le to right to how your control is currently wired simply switch
the orange and black wires on the coils of the angle valve spool.