Full Product Manual

v.170626 En.13
ENGLISH
SP3000 WINCH WIRING DIAGRAM
Red
Black
Red
Red
Black
Black
12 volt
Vehicle Battery
-
+
L
J
N
U
T
S
On Your
Plow
Inside
Your
Vehicle
In the
Engine
Compart-
ment
CAUTION: Before
working on the winch or
the wiring in your vehicle,
disconnect the battery and
any other power sources.
CAUTION: When
securing winch connector
leads to posts be sure to
NOT over tighten nuts as
this will damage winch and
void warranty
NOTE: The 35 amp circuit
breaker is necessary to prevent
possible electrical damage to
either the winch or the vehicle’s
electrical system.
NOTE: Mount the
control box securely,
away from moving parts
and sources of heat.
NOTE: Apply
electrical contact grease
to all connections to
prevent corrosion
NOTE: Do not connect the black
(negative ground) wire to the
vehicle chassis or bodywork. It
must lead directly to the negative
battery terminal.
IN = raise blade
OUT = lower blade