Specifications
27
=RQH
,QSXW
6\VWHP.H\SDGV
2SWLRQ /RFDWLRQ 'HIDXOW 1HZ9DOXH
±6WDWXV
±0RQLWRU
±)
±
±
±
6WDWXV
0RQLWRU
)
)
2SWLRQ
:RUG 6\VWHP
:RUG .H\SDG
:RUG 1$
:RUG 1$
Zone 26: System Keypads
All keypad activations report as Zone 26. Keys
and key combinations are fully programmable.
Use the button function list (Zones 24-25) to
change the functionality of the listed keypad
inputs. The word description is predefined as
"System Keypad." This can be changed by altering
the zone description for zone 26. Programming
zone descriptions is covered at the end of this
section. Option 1 value 016 (report to central
station) is the only Zone Option that applies to
zone 26.
Only the LED (not LCD) keypads can be used with
the Destiny-4100 panel.
Zone 27: Local Phone
While in local phone keypad mode, a user can activate a zone by entering 5 zeros. The 5 zero activation is
treated by the system in the same manner as a traditional zone open. Zone Options 1 and 2 apply. This zone is
traditionally programmed as a 24 hour panic. The word description is predefined as "House Phone." This can be
changed by altering the zone description for zone 27. Programming zone descriptions is covered at the end of
this section.
Zone 28: Remote Phone / Phone Line Monitor
Loss of phone line is treated by the system in the same manner as a traditional zone open. See System Times
And Other Options (location 0456) to determine the number of 4 second samples before panel detects a loss of
phone line. For notification at the keypad, this input can be programmed as an auxiliary zone type for
enunciation at the keypad, a day zone for extended monitoring and alerts while armed, or a 24 hour panic for
alarm activation upon loss of phone line (not recommended). Zone 28 is reported when an activation occurs
from a remote phone (see User Code + digit). The word description is predefined as "Remote Phone." This can
be changed by altering the zone description for zone 28. Programming zone descriptions is covered at the end
of this section.