System information

show stacks Command
Memory Maps B-505
Figure B-1 show stacks Command Output Showing the Software Program Counter
Address
Figure B-2 shows output from a hardware error and includes an example of a hardware operand
address that can be used with the memory maps in this appendix. The operand address points to the
register space for MCI unit 0 and indicates a hardware or microcode problem with that unit.
Figure B-2 show stacks Command Output Showing the Hardware Address
ROUTER> show stacks
Minimum process stacks:
Free/Size Name
972/1000 env delay init
866/1000 Router Init
556/1000 Init
638/1000 RSRB Connector
1230/2000 Virtual Exec
Interrupt level stacks:
Level Called Free/Size Name
1 306611 952/1000 env-flash
3 22294573 496/1000 Multiport Communications Interfaces
5 2986 968/1000 Console UART
System was restarted by error - Software forced crash, PC 0x4854E
GS Software (GS3-K), Version 9.1(4) [fc1], SOFTWARE
Compiled Thu 25-Mar-93 09:49 by daveu
Stack trace from system failure:
FP: 0x2B0424, RA: 0x3B04
FP: 0x2B0458, RA: 0xF39C2
FP: 0x2B046C, RA: 0xF4566
FP: 0X2B0490, RA: 0x112F0
FP: 0x2B04B0, RA: 0x2560
program counter address
Minimum process stacks:
Free/Size Name
970/1000 env delay init
866/1000 Router Init
554/1000 Init
1500/2000 Exec
Interrupt level stacks:
Level Called Free/Size Name
1 16803 956/1000 env-flash
3 4827380 772/1000 cBus Interfaces
5 5627 968/1000 Console UART
System was restarted by bus error at PC 0x71EAE, address 0x210C008
GS Software (GS3-K), Version 9.1(5), RELEASE SOFTWARE
Compiled Wed 19-May-93 18:35 by daveu
Stack trace from system failure:
FP: 0x2B6BA0, RA: 0xF496
FP: 0x2B6BCC, RA: 0xABDFA
FP: 0x2B6C2C, RA: 0xABA2C
FP: 0x2B6C40, RA: 0xAB338
FP: 0x2B6C68, RA: 0x258C
Hardware address
in the bus controller
address space