System information

Troubleshooting Dialin Connections 16-357
Dialin: Dialin Client Receives No exec Prompt
Modem speed setting is
not locked
Step 5 Use a modem command string that includes the lock DTE speed
command for your modem. See your modem documentation for
exact configuration command syntax.
Note: The lock DTE speed command, which might also be referred
to as port rate adjust or buffered mode, is often related to the way in
which the modem handles error correction. This command varies
widely from one modem to another.
Locking the modem speed ensures that the modem always
communicates with the Cisco access server or router at the speed
configured on the Cisco auxiliary port. If this command is not used,
the modem reverts to the speed of the data link (the telephone line)
instead of communicating at the speed configured on the access
server.
Possible Causes Suggested Actions