Specifications

IP Office Trunk Cards
IP Office trunk cards provide connectivity to ISDN and analogue circuits. Each trunk card installs onto an IP Office base
card. Therefore, when designing a solution, the number of base cards verses the number of trunk (daughter) cards must be
considered.
Item Description
ATM4 Analogue
Line Connectivity
Provides connectivity for 4 analogue lines
BRI 4 ISDN2e
Trunk Card
Provides connectivity for 2 ISDN2e circuits (4 channels)
BRI 8 ISDN2e
Trunk Card
Provides connectivity for 4 ISDN2e circuits (8 channels)
IP500 PRI 30 E1
Trunk Card
Provides connectivity for up to 30 PRI channels. Note: only 8
circuits are enabled by default. PRI E1 licence is required to
increase the number of channel
IP500 PRI 60 E1
Trunk Card
Provides connectivity for up to 60 PRI channels. Note: only 16
circuits are enabled by default. PRI E1 licence is required to
increase the number of channels
IP500 BRI S0
Converter Cable
Required to convert BRI to an S08 for ISDN to the desk
Trunk Licensing
The following licences are required to increase the number
of PRI channels:
• IP500 E1 Additional 2 Channels
• IP500 E1 Additional 8 Channels
• IP500 E1 Additional 22 Channels
The following licenses are required for SIP trunks:
• SIP Trunks x 1
• SIP Trunks x 5
• SIP Trunks x 10
• SIP Trunks x 20
Endpoint Licensing
An IP Avaya IP Phone licence is required to enable each
Avaya IP endpoint including 5600, 1600 and 9600 IP phones
as well as 3600 and 3700 wireless phones:
• Avaya IP Phone x 1
• Avaya IP Phones x 5
• Avaya IP Phones x 20
Note: 12 x IP Phones are enabled with a VCM32 and VCM64 card with IP Office R6.
An SIP Endpoint license is required to enable each 3rd Party
SIP endpoint:
• SIP Endpoint x 1
• SIP Endpoint x 5
• SIP Endpoint x 10
• SIP Endpoint x 20
• SIP Endpoint x 50
IP Office Trunk and Endpoint Licensing
IP Office SIP and IP endpoints must be enabled via a license key. Additional PRI channels are also available to increase trunk
capacity.
Platforms
13