User`s manual

Content Security Gateway User’s Manual
- 90 -
Server (Load Balance Server).
 External Service Port: Input the port number that the virtual server will use. Changing the
Service will change the port number to match the service.
 Load Balance Server: The internal server IP address mapped by the virtual server. Four
computer IP addresses can be set at most, and the load can be maintained in a balance by
round robin algorithm.
Step 3. Enter the IP address of the LAN network server(s), to which the virtual server will be mapped.
Up to four IP addresses can be assigned at most.
Step 4. Click OK to save the settings of the Virtual Server.
NOTE: The services in the drop-down list are all defined in the Pre-defined and Custom section of the
Service menu.
Adding New Virtual Server Service Configuration
Step 1. Select Virtual Server in the menu bar on the left hand side, and then select Server 1/2/3/4
sub-selections.
Step 2. In Server 1/2/3/4 Window, click “New Entry” button.
Step 3. Enter the parameters in the Virtual Server Configuration column.