User`s manual

Content Security Gateway User’s Manual
- 71 -
Authentication Port: The port number used for user login page. When user want to access WAN network
and the authentication (Policy -> Outgoing) is enabled, the user has to send http request with this port number.
CS-500 will send a User Login page for user to input user name and password. For example, if the gateway
IP address is 192.168.1.1 and authentication port is 82, user have to open a web browser and input
http://192.168.1.1:82
on the address file to have the user login page.
Re-Login if Idle: When the LAN user access to WAN network and do not use for a while, the connection will
be time-out. User has to re-login again. The default time is 30 minutes.
Re-Login after user login successfully: You can limit the access time for the LAN user, when time is up
LAN user will need to re-login again. If the time setting sets to 0 that means unlimited. Select Disallow
Re-login if the auth user has login will disable this feature.
URL to redirect when authentication succeed: You can set up the default webpage to force user to access
it first when user passes the authentication.
Messages to display when user login: You can specify a message to display at user’s login page when
user passes the authentication.
4.3.5.2 Auth User
Click Authentication in the menu bar on the left hand side and click Auth User.
Definitions:
Name：The name of the Authentication you want to configure.
Configure: modify settings or remove users.
Adding a new Auth User
Step 1. In the Authentication window, click the New User button to create a new Auth User.