User`s manual

Content Security Gateway User’s Manual
- 40 -
enable, the device will respond to echo request packets from the WAN network.
WebUI: Select this to allow the device WebUI to be accessed from the WAN network. This will allow the
WebUI to be configured from a user on the Internet. Keep in mind that the device always requires a
username and password to enter the WebUI.
For Dynamic IP Address (Cable Modem User): This option is for users who are automatically assigned an
IP address by their ISP, such as cable modem users. The following fields apply:
IP Address: The dynamic IP address obtained by the Content Security Gateway from the ISP will be
displayed here. This is the IP address of the WAN port of the device.
MAC Address: This is the MAC Address of the device.
Hostname: This will be the name assign to the device. Some cable modem ISP assign a specific
hostname in order to connect to their network. Please enter the hostname here. If not required by
your ISP, you do not have to enter a hostname.
Domain Name: You can specify your own domain name or leave it blank.
User Name: The user name is provided by ISP.
Password: The password is provided by ISP.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
Ping: Select this to allow the WAN network to ping the IP Address of the Content Security Gateway.
This will allow people from the Internet to be able to ping the Content Security Gateway. If set to
enable, the device will respond to echo request packets from the WAN network.
WebUI: Select this to allow the device WEBUI to be accessed from the WAN network. This will allow