User`s manual

Content Security Gateway User’s Manual
- 39 -
WAN Interface
Using the WAN Interface, the Administrator can sets up the WAN network. These IP addresses are real
public IP Addresses, and are routable on the Internet.
For PPPoE (ADSL User):
This option is for PPPoE users who are required to enter a username and
password in order to connect, such as ADSL users.
Current Status: Displays the current line status of the PPPoE connection.
IP Address: Displays the IP address of the PPPoE connection
Username: Enter the PPPoE username provided by the ISP.
Password: Enter the PPPoE password provided by the ISP.
IP Address provided by ISP:
Dynamic: Select this if the IP address is automatically assigned by the ISP.
Fixed: Select this if you were given a static IP address. Enter the IP address that is given to you by
your ISP.
Max. Upstream/Downstream Bandwidth: The bandwidth provided by ISP.
Service-On-Demand:
Auto Disconnect: The PPPoE connection will automatically disconnect after a length of idle time (no
activities). Enter in the amount of idle minutes before disconnection. Enter ‘0’ if you do not want the
PPPoE connection to disconnect at all.
Ping: Select this to allow the WAN network to ping the IP address of the Content Security Gateway.
This will allow people from the Internet to be able to ping the Content Security Gateway. If it sets to