User`s manual

Content Security Gateway User’s Manual
- 38 -
Configuring the Interface Settings
Using the LAN Interface, the Administrator sets up the LAN network. The LAN network will use a private IP
scheme. The private IP network will not be routable on the Internet.
IP Address: The private IP address of the Content Security Gateway’s LAN network is the IP address of the
LAN port of the device. The default IP address is 192.168.1.1. If the new LAN IP Address is not 192.168.1.1,
the Administrator needs to set the IP Address on the computer to be on the same subnet as the Content
Security Gateway and restart the System to make the new IP address effective. For example, if the Content
Security Gateway’s new LAN IP Address is 172.16.0.1, then enter the new LAN IP Address 172.16.0.1 in the
URL field of browser to connect to Content Security Gateway.
NetMask: This is the subnet mask of the LAN network. The default netmask of the device is 255.255.255.0.
Ping: Select this to allow the LAN network to ping the IP Address of the Content Security Gateway. If set to
enable, the device will respond to ping packets from the LAN network.
WebUI: Select this to allow the device WEBUI to be accessed from the LAN network.
4.2.2 WAN
Entering the Interface menu
Click on Interface in the left menu bar. Then click on WAN below it. The current settings of the interface
addresses will appear on the screen.