User`s manual

Content Security Gateway User’s Manual
- 37 -
Removing a Host Table
Step 1: In the Host Table window, find the policy to be removed and click the corresponding Remove
option in the Configure field.
Step 2: A confirmation pop-up box will appear, click OK to remove the Host Table or click Cancel.
4.1.12 Language
Administrator can configure the Content Security Gateway to select the Language version.
Step 1. Select the Language version (English Version, Traditional Chinese Version or Simplified
Chinese Version).
Step 2. Click [OK] to set the Language version or click Cancel to discard changes.
4.2 Interface
In this section, the Administrator can set up the IP addresses for the office network. The Administrator may
configure the IP addresses of the LAN network, the WAN network, and the DMZ network. The netmask and
gateway IP addresses are also configured in this section.
4.2.1 LAN
Entering the Interface menu:
Click on Interface in the left menu bar. Then click on LAN below it. The current settings of the interface
addresses will appear on the screen.
ÍÍ