User`s manual

Content Security Gateway User’s Manual
- 22 -
Dynamic Routing (RIPv2)
Enable Dynamic Routing (RIPv2), CS-500 will advertise an IP address pool to the specific network so that the
address pool can be provided to the network. You can choose to enable LAN, WAN or DMZ interface to allow
RIP protocol supporting.
Routing information update timer: CS-500 will send out the RIP protocol in a period of time to update the
routing table, the default timer is 30 seconds.
Routing information timeout: If CS-500 does not receive the RIP protocol from the other router in a period
of time, CS-500 will cut off the routing automatically until it receives RIP protocol again. The default timer is
180 seconds.