User`s manual

Content Security Gateway User’s Manual
- 193 -
this way, the administrator can handle the whole network condition and takes it as a basis of managing the
network.
The administrator needs to go to the Policy to set the network IP of the statistics. By the WAN statistics you
can obtain the status of the network.
4.7.2.1 WAN Statistics
Step 1. Click Statistics in the menu bar on the left hand side, and then select WAN Statistics.
Step 2. The WAN Statistics will be displayed. It displays statistics of WAN network connections
(downstream and upstream as well) in a total amount by minute (60 minutes), hour (24 hours),
day (30 days), Month and Year. Select the time units (minute, hour, day, month or year) of the
graph.
Y-Coordinate: Four options are available: Total, Bits/sec, Bytes/sec and Utilization.
X-Coordinate: Time（Hour/Minute/Day）.
4.7.2.2 Policy Statistics
Entering the Statistics window
The Statistics window displays the statistics of current network connections.
 Source: the name of source address.
 Destination: the name of destination address.
 Service: the service requested.
 Action: permit or deny
 Time: viewable by minutes, hours, or days