User`s manual

Content Security Gateway User’s Manual
- 158 -
travelling through the Content Security Gateway.
Configure: Modify settings or remove policies
Move: This sets the sequence of the policies, number 1 being the first policy to proceed.
Adding a DMZ To WAN Policy:
Step 1: Click the New Entry button and the Add New Policy window will appear.
Step 2: Configure the parameters.
Source Address: Select the name of the DMZ network from the drop down list. The drop down
list will contain names of DMZ networks defined in DMZ section of the Address menu. To add a
new source address, please go to the DMZ section under the Address menu.
Destination Address: Select the name of the WAN network from the drop down list. The drop
down list lists names of addresses defined in WAN section of the Address menu. To add a new
destination address, please go to WAN section of the Address menu.
Service: Select a service from drop down list. The drop down list will contain services defined in
the Custom or Group section under the Service menu. These are services/application that are
allowed to pass from the DMZ network to the WAN network. Choose ANY for all services. To
add or modify these services, please go to the Service menu.
Action: Select Permit or Deny ALL from the drop down list to allow or reject the packets
travelling from the specified DMZ network to the WAN network.
Logging: Select Enable to enable flow monitoring.
Statistics: Select Enable to enable flow statistics.
Content Blocking: Select Enable to enable Content Blocking.