User`s manual

Content Security Gateway User’s Manual
- 157 -
4.4.4 DMZ To WAN & DMZ To LAN
This section describes steps to create policies for packets and services from DMZ networks to WAN networks.
Please follow the same procedures for DMZ networks to LAN networks.
Entering the DMZ To WAN window:
Click DMZ To WAN under Policy menu and the DMZ To WAN table appears displaying currently defined
DMZ To WAN policies.
The fields in the DMZ To WAN window are:
Source: Source network addresses which are specified in the DMZ section of the Address
window.
Destination: Destination networks, which is the WAN network address
Service: Services supported by Servers of WAN networks.
Action: Control actions, to permit or deny packets from the DMZ network to WAN networks
travelling through the Content Security Gateway.
Option: Specify the monitoring functions on packets from the DMZ network to WAN networks