User`s manual

Content Security Gateway User’s Manual
- 141 -
4.3.8.2 PPTP Server
This function allows the remote client dialup to your local network and access local resources by PPTP (Point
to Point Tunnel Protocol) client software.
Entering the PPTP Server window
Step 1. Select VPN→PPTP Server.
 PPTP Server：Click Modify to select Enable or Disable.
 Client IP Range: Display the IP addresses range for PPTP Client connection.
 User Name：Displays the PPTP Client user’s name for authentication.
 Client IP：Displays the PPTP Client’s IP address for authentication.
 Uptime：Displays the connection time between PPTP Server and Client.
 Status：Displays current connection status between PPTP Server and PPTP client.
 Configure：Click Modify to modify the PPTP Client settings or click Remove to remove the
item.
Modifying PPTP Server Design
Step 1. Select VPN→PPTP Server.
Step 2. Click Modify after the Client IP Range.
Step 3. In the Modify Server Design Window, enter appropriate settings.