Specifications

28. Technical Specificatons
IP Office Matrix - Release 8.1 (2)
Page 85
• RJ45 sockets: Auto-negotiating 10/100 BaseT Ethernet (10/100Mbps).
• IPO 412: This module has 2 LAN ports acting as a half-duplex layer-3 LAN switch. Both ports are fixed MDI
crossover ports. In the IP Office configuration, port 1 is LAN1, port 2 is LAN2.
configuration, the LAN ports are on LAN1, the WAN port on LAN2.
LAN
• IPO 406V2: This module has 8 LAN ports acting as a full-duplex layer-2 LAN switch. Ports are auto-MDI/MDIX.
All ports are on LAN1 in the IP Office configuration. The IP406V2 provides the facility to configure a second
logical interface on port 8 of the built-in Ethernet switch. Once enabled, the LAN 2 interface is available as an
IP route destination
• IP 500 -This unit has 2 ports marked LAN and WAN acting as a full-duplex layer-3 LAN switch. In the IP Office
configuration, the LAN port is LAN1, the WAN port is LAN2.
• IP500: RJ45 Ethernet socket.
WAN
• IPO IP406V2 and IPO 412 Control Units: 37 way D-Type female sockets. X.21 interface to 2048k bps, V.35 interface
to 2048Kbps and V.24 Interface to 19.2Kbps.
Audio
• 3.5mm Stereo Jack socket: Input impedance - 10k /channel
Maximum a.c. signal – 200mV rms
• 3.5mm Stereo Jack socket: Switching Capacity - 0.7A.
External Output Port
• Maximum Voltage: 55V d.c. On state resistance - 0.7Ω.
• Short circuit current: 1A. Reverse circuit current capacity - 1.4A.
Embedded Voice Memory
• IP406V2 and IP 500: 512MB Compact Flash Memory Card
• IP500v2 SD Flash Memory Card SDHC minimum 4GB FAT32 format (Single partition, SDHC, class2+, FAT32, SPI & SD bus)
ACTA (FCC Reg code)
ACTA Label
IP500 V2
• US: AY1PH01BS114-1 (REN:01B)
IP500
• US: AY1PH01BIPO500 (REN:01B)
IP406V2 Office
• US: AY1AD04BIP406V2 (REN: 04B)
IP412 Office
• US: AV1DY04BIP412 (REN: 04B)
IP400 ATM16
• US: AY1MH08AIPATM16 (REN: 08B)
Return to Cover