Specifications

34. Short Code Features
IP Office Matrix - Release 8.1 (2) P
age 313
Feature Description Telephone Number
2.1 4.0 4.1 4.2 5 6.0 6.1 7.0 8.0 8.1
IP Office Release
Default Short
Code
Phone
Manager
Soft-Console
Control
Program
Button
Dial 3K1
Sets the ISDN bearer capabilities to 3.1Khz audio call.

Telephone number.
  

D3K1
         
Dial 56K
Sets the ISDN bearer capabilities to 56Kbps data call.

Telephone number.
  

D56K
         
Dial 64K
Sets the ISDN bearer capabilities to 64Kbps data call.

Telephone number.
  

D64K
         
Dial CW
Call the specified extension number and force call waiting indication on if the extension is
already on a call.
If the user has call appearance buttons programmed, call waiting will not get activated. The next
incoming call will appear on an available call appearance button. When there are no available
call appearance buttons, the next incoming call will receive busy tone.

Extension number.
  

DCW
         
Dial Direct
Call the extension specified and force automatic answer if supported by the telephone type.

Extension number.
  

Dirct
         
Dial Direct Hot
Line
When the line appearance is mapped to a short code using the
DialDirectHotLine short code
feature, no secondary dial tone is generated and the number is dialed directly. This feature
should not be confused with the hot line feature enabled using ?D short codes.

Telephone number.
             
Dial Emergency
Dials the number specified regardless of any call barring applicable to the user.
On all IP Office systems, regardless of locale, system and or ARS, short codes using the Dial
Emergency feature should be created for any required emergency service numbers. Those short
codes should be useable by all users from all extensions. Those short codes should route the
calls to suitable lines. If the system uses prefixes for external dialing, the dialing of emergency
numbers with and without the prefix should be allowed. Note that the blocking of emergency
numbers or the routing of emergency numbers to a intermediate destination other than the
emergency network may be against local and nation laws.
For systems with a United States locale, the Dial Emergency short code acts differently. Calls
matched to Dial Emergency short codes are routed using the details contained in the E911
forms. This routing will then be either via installed E911 Adjunct equipment or via grouped set
of trunks and extensions called zones.

Telephone number.
  

Emrgy
         
Dial Extn
This feature can be used to dial an internal extension number (user or hunt group).

Extension number. IP Office 4.2+ can use p(x) as a
suffix to the Telephone Number to change the
priority of a call. Allowable values for x are 1, 2 or
3 for low, medium or high priority respectively. For
example Np(1).
             
Dial Fax
This feature is used to route fax calls via T38 Fax Relay.

Fax destination number.
             
Dial Inclusion
This feature intrudes on the existing call of the specified target extension. The intruder and the
target extension can then talk but cannot be heard by the other party. This can include intruding
into a conference call, where the conference will continue without the intrusion target.
During the intrusion all parties hear a repeated intrusion tone. When the intruder hangs-up the
original call parties are reconnected.
Use of this feature is subject to the
Can Intrude status (configured in Manager via the User
form's Telephony tab) of the intruder and the target extension (the extension to be intruded
upon).
Attempting to hold a dial inclusion call simply ends the intrusion part of the call. The inclusion
cannot be parked.

Target extension number.
  

Inclu.
         
Dial Paging
This feature makes a page call to an extension or group. The target extension or group members
must
support page calls (that is to be able to auto-answer calls).

Extension or group number.
 

Groups only

Page
         
Dial Physical
Extension By
Number
Dial a specified extension number regardless of the current user logged on at that extension and
any forwarding, follow me or do not disturb settings applied by the current extension user. Note
that the extension number used is the Base Extension number set against the extension
configuration settings.

Base Extension number

*70*N#
(MU-Law only)
 

PhyEx
         
Dial Physical
Number By ID
Dial a specific extension using its system ID. This may be necessary in hot desking
environments where
some extensions have been created with no default extension number. Without an extension
number, a
call can not be made to that extension unless a short code is created.

Extension ID

*71*N#
(MU-Law only)
 

DialP
         
Dial Speech
This feature allows a short code to be created to force the outgoing call to use the Speech bearer
capability.

Telephone number.
  

DV110
         
Dial V110
Sets the ISDN bearer capabilities to V110. The call is presented to local exchange as a "Data
Call".

Telephone number.
  

DV120
         
Dial V120
Sets the ISDN bear capabilities using V.120.

Telephone number.
  

Dvide
         
Dial Video
The call is presented to the local exchange as a "Video Call".

Telephone number.
  

DSpch
         
Disable ARS Form
This feature can be used to put an ARS form out of service. It can be used with ARS forms for
which an Out of Service Route has been configured in Manager. The short code feature
Enable
ARS Form can be used to return an ARS form to in service.

ARS form number.
             
Disable Internal
Forwards
This feature turns off the forwarding of internal calls for the user. It applies to Forward
Unconditional,
Forward on Busy and Forward on No Answer.
              
Disable Internal
Forward
Unconditional
This feature turns off the forwarding of internal calls for the user. It applies to Forward
Unconditional only.
              
Disable Internal
Forward Busy or
No Answer
This feature turns off the forwarding of internal calls for the user. It applies to Forward on Busy
and
Forward on No Answer.
              
Display Msg
Allows the sending of special functions to DS port display phone extensions.

The telephone number takes the format N";T"
where:
• N is the target extension.
• T is the text message. Note that the "; before the
text and the " after the text are required.
  

Displ
         