Manual

7
Power
Line voltages may vary in some geographical locations.
If your line voltage is much lower than the oven voltage
rating, warm up time will be longer and motors may
overload or run hot. If your line voltage is higher than
nameplate rating, the motor may run hot and draw
excessive amps.
If the line voltage varies more than 10% from the oven
voltage rating, some electrical components such as
relays, temperature controls, etc. may operate
erratically.
Power Requirements
Volts Amps Hertz Phase Heater KW
208 23 60 1 3
220 24 50 1 3.4
240 24 60 1 4
WARNING:
Failure to read this warning
can result in death, serious
bodily injury or property
damage. All conductors
must be copper unless the
specific terminal is marked
for use with aluminum
conductors.
WARNING:
All grounding and safety
equipment must be in compliance
with applicable codes, ordinances
and accepted safe practices.