Owner's manual

Protocol Manager Instruction Manual INSTALLATION & SETUP
Version 1 23
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
1. Click Window (above the User ID) and then Setup (Figure 12) to display the Software Setup
Window. Press Windows to display the Passwords Tab Dialogue Box (Figure 18).
2. Set Auto Logoff Time: time period before the operator is logged off
a. Set a value from 0 minutes to 60 minutes by sliding the bar.
b. Setting Auto Logoff Time to zero disables this feature and the system will not
automatically log off.
c. Press Accept to save the selected parameters. Press Restore to return to the previously
saved parameters.
3. Can Exit if Not Logged In:
a. Click/check to allow Protocol Manager to be stopped at any time.
b. If left unchecked, Protocol Manager can be stopped only if a user has successfully logged
in at any level.
4. Exit Setup Mode by clicking Close or the X in the upper right corner of the Protocol
Manager Setup window.
Figure 18. Passwords tab dialogue box.