Owner manual

Protocol 3 Controller Owner’s Manual WORKING WITH OPERATING MODES
Version 1.2 41
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
5.5. USB Menu
Use USB Menu to perform read/write options for USB devices connected to the unit using the
front USB port (Figure 15). Access the USB Menu from the Main Menu. See Table 14 for USB
Menus options.

Regularly backup critical system data according to your
company policies. Be sure to back up configuration and profiles
to a removable memory device. Refer to Section 5.5.1 for more
information.

Note that a memory stick must be in place before the USB Menu
will display.
1. Navigate to and highlight USB Menu.
2. Press to display Mode Unlock Code screen.
3. Press as necessary to enter Factory Unlock Code 0010.
4. Press to display the USB Menu screen.
Figure 15. USB Menu.