Owner manual

WORKING WITH OPERATING MODES Protocol 3 Controller Owner’s Manual
40 Version 1.2
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
Figure 13. Recorder Control.
Figure 14. Recorder Status.
5.4. Recorder Control
Use Recorder Control to start, stop and clear
recordings (Figure 13). Access the Recorder
Control from the Main Manu.
1. Navigate to and highlight Recorder
Control.
2. Press to display Recorder Control
Enter Data Recorder Unlock Code screen.
3. Press as necessary to enter Factory
Unlock Code 0010.
4. Press to display the Start/Stop Data
Recording screen.
5. Press or to highlight and press to Stop Recording or Start Recording.
The Recorder Status screen (Figure 14) displays
after selecting an option.
Clear a recording while in Recorder Status screen
by pressing to advance to the Clear
Recordings screen.

All recordings in the unit can be downloaded to a USB device
using the USB port and the USB Menu.