Quick Start Manual

Running The Profile

Press the PROF key until 1 is displayed in the Program Display. Press the Run/HOLd key until

1 is displayed in the Segment Display and Final SP is displayed in the message display. Make

changes with the UP and Down arrow keys. Press the SCROLL key to move to the next

display.

Segment Description Message Display Setting In Lower Display

Setpoint Final SP 250

#1 Ramp Time Time 0.10

Event Status Event 0001

Setpoint Final SP 250 (or “- - - -“)

#2 Soak Time Time 1.00

Event Status Event 0001

Setpoint Final SP 70

#3 Ramp Time Time 0.25

Event Status Event 0000

Setpoint Final SP 70 (or “- - - -“)

#4 Time Time

End *

Event Status Event 0000

* Press and hold the Down arrow key until “End” is displayed.

Press the mode key to return to the base mode. Press the PROF key until 1 is displayed in the

segment display. Press the Run/HOLd key to start the profile.