Owner's manual

MAINTENANCE LBB Series Oven Owner’s Manual

44 Version

Figure 13. Remove Control Panel to Access Control Instrument (using T20 Torx bit driver).

6.5.1. Replace the Control Instrument

Danger!

Do not attempt any service on this oven before opening the

main power disconnect switch or removing all power from the

oven.

Tools needed:

• One-quarter (1/4) inch socket set

• P1 Phillips Tip Screwdriver

• T20 Torx bit driver

1. Disconnect power.

2. Remove four screws from the face of the control panel (Figure 13).