Integration Instructions

Page 1 of 3 2019-01-02
PROPRIETARY AND CONFIDENTIAL INFORMATION
NOT TO BE SHARED WITH THIRD PARTIES WITHOUT PRIOR WRITTEN APPROVAL OF DESKTOP METAL INC.
Cartridge RFID Integration Instructions
This document provides integration information for the cartridge RFID module. The module is
intended for incorporation in host systems developed & manufactured by Desktop Metal, Inc.
and will not be end-user accessible or replaceable. The module is not intended for use in host
systems with mobile or portable applications.
FCC Compliance Information
Model BMD RFID 1
FCC ID: 2AOIOBMDRFID1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Desktop Metal, Inc.
63 3
rd
Avenue, Burlington, MA 01803
www.desktopmetal.com
Changes or modifications not expressly approved by Desktop Metal, Inc. could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
End Product Labeling
The final end product must be labeled in a visible area with the following:
“Contains Transmitter Module FCC ID: 2AOIOBMDRFID1” or “Contains FCC ID: 2AOIOBMDRFID1”
or similar wording.