Technical Specs

Technical Specification Page 20 of 25
DESKO NEPTUN chrom Doc # 7 001 160 101 Doc.-Rev: 2019-07-24
To read a chip card, the card needs to be inserted in the provided card slot on the
upper left side of the device. Please note that the contact on the chip card needs to
face towards the user, as shown in the picture below.
Picture 5: direction of chip card contact
7.4 Using the China ID Reader
The China ID reader is a single antenna design located within the right-hand part of
the keyboard. To start an ID read, please place the ID card on top of the red
highlighted area indicated in the picture below.
8 Service and Maintenance
In general, DESKO products are maintenance free. However, should you require any
technical assistance, please contact our support team at [e-mail].
contact of chip card
China ID reading: red
highlighted area, single
antenna design