Technical Specs

Technical Specification Page 18 of 25
DESKO NEPTUN chrom Doc # 7 001 160 101 Doc.-Rev: 2019-07-24
7.2 Reading an RFID Document
The integrated NFC/RFID module can read RFID documents according to ISO
14443(A/B), e.g. RFID chip of a biometric passport. The RFID module is located within
the right-hand part of the keyboard.
To get access to the RFID chip of a document, the MRZ data of the document is
needed. To start an RFID read, open the document and pull the data page through the
swipe slot. Now the document needs to be put near the integrated RFID reader.
There are two possibilities where to put the document with regard to reading RFID:
1. Place the document below the
right wing of the keyboard.
2. Place document on top of the
right wing of the keyboard.
7.3 Reading a Chip Card
The chip card reader module of the NEPTUN chrom is able to read ISO 7816 compliant
chip cards. For using the chip card reader it is necessary to install an appropriate
software package. Please refer to the Quick Installation Guide, which is shipped with
the hardware or contact our support team at [e-mail] or online via
www.desko.com/support.