Installation Instructions

• Don’t use the umbrella clothes dryer if it is damaged in any way.
• The dryer has a diameter of 6’/185.4cm when it is opened. Ensure that there is
enough space to allow the umbrella clothes dryer to rotate freely.
• To adjust to the desired height, push the button on the lower bracket and slide
the bracket down slightly to allow the lines to go slack.
• When you release the button, the bracket will automatically lock into place in
one of the holes provided for that purpose.
• Release the upper bracket and slide it to the desired position/height.
• Retighten the lines of your umbrella clothes dryer by lifting the lower bracket.
• Keep your fingers as well as other objects away from the joints to avoid injury.
• The umbrella clothes dryer is designer for a maximum load of 99.2lbs/45kg.
Distribute your laundry evenly on all four sides. Avoid one-sided use of the unit.
• Please follow the ground anchor assembly and fitting instructions.
ASSEMBLY
HANDLING INSTRUCTIONS
Once cement is dry insert top pole section into the lower pole section. Dryer should
be in closed position, make sure clothesline is not tangled and on the correct side
of the center pole. Release dryer arms from top plastic fin at the top of the dryer
assembly.
honeycando.com