DRY-05262 outdoor umbrella dryer 73 in x 73 in x 72 in HONEYCANDO.COM | CUSTOMERSERVICE@HONEYCANDO.COM | 877.2.I.CAN.DO (877.242.
ASSEMBLY GROUND SLEEVE INSTALLATION Plastic ground sleeve is designed to hold pole vertically yet release easily. Won’t rust or seize. Attached cap protects against debris when not in use. 1 8" 20 cm 2 18" 45.7 cm Dig hole 8” to 12” in diameter and 16-18” deep. Taper hole larger at the bottom. Fill bottom of the hole approximately 3” deep with small rocks. 3 Pour about 6” of concrete into the hole, or until it reaches the bottom of the ground sleeve.
ASSEMBLY HANDLING INSTRUCTIONS Once cement is dry insert top pole section into the lower pole section. Dryer should be in closed position, make sure clothesline is not tangled and on the correct side of the center pole. Release dryer arms from top plastic fin at the top of the dryer assembly. • • • • • • • • • Don’t use the umbrella clothes dryer if it is damaged in any way. The dryer has a diameter of 6’/185.4cm when it is opened.
YOUR SOURCE FOR ORGANIZATION, STORAGE & STYLE Honey-Can-Do International 5300 St. Charles Road, Berkeley, IL 60163 USA 877.242.2636 | honeycando.com | customerservice@honeycando.com ©2020 Honey-Can-Do International, LLC | All Rights Reserved Visit youtube.com/myhoneycando to watch our assembly videos.
