Assembly Instructions

Includes:

(1) shelf

(3) screws

(2) drywall anchors

(3) stickers

Suggested Tools:

Picture Ledge

min.

installation

Locate the wall studs. Place shelf against wall in the desired position. Use a level to

verify that the shelf is level. Mark hole locations above the shelf for each hole on wall

with a pencil. Remove shelf.

Double check holes with a level and re-mark if necessary.

Install screws into marks with studs, for the marks without a wall stud, use a power drill

and a 3/32” drill bit. Drill holes into the wall at the pencil mark. Insert anchor. Install

screws into the studs (or anchors), securing the shelf onto the wall.

Note: If you are drilling into a wall where no studs are available, use the proper

anchors to mount the shelf. Anchors have been provided for this purpose.

Cover the screws with the stickers.

Item#

213-4035

213-4036

213-4038

Model#

9601057

9601058

9601061

3/32”

36 in 17 lbs

Size Picture Ledge

MENARDS.COMM4035 4036 4038 Picture Ledge E V0

Make sure that at least one screw will be installed

into wall studs for best results. Use stud finder (not

included) to locate wall studs to hold the

maximum weight.