Assembly Instructions

Includes:
(1) shelf
(1) bracket
(4) set screws
(4) screw covers
(4) screws
(4) drywall anchors
Suggested Tools:
Corner Bracket Shelf
min.
installation
15
Make sure that at least one screw will be installed
into wall studs for best results. Use stud finder
(not included) to locate wall studs to hold the
maximum weight.
1
2
3
4
5
Place bracket in desired location in corner of wall. Using a level, mark holes with a
pencil where holes in the mounting bracket meet the wall.
Check to see if wall stud is present For the marks without a wall stud, use a power drill
and a 3/16” drill bit. Drill holes into the wall at the pencil mark and insert anchor.
Note: If you are drilling into a wall where no studs are available, use the proper
anchors to mount the bracket. Please use all anchors that have been provided for
this purpose.
Line the bracket up with where the wall stud holes are marked, using the drill, install
the screws into the studs (or anchors) to secure the bracket to the wall.
Place shelf onto bracket aligning the shelf holes with the bracket holes and install set
screws.
Place screw covers over the installation screws.
Item#
213-4044
213-4045
213-4046
Model#
9601050
9601054
9601056
3/16”
Size Bracket Shelves
10 in 8 lbs
12 in 15 lbs
MENARDS.COMM4044 4045 4046 Corner Bracket Shelf E V1