Assembly Instructions

Includes:
(1) shelf
(2) brackets
(1) small set screw
(4) medium set screws
(4) stickers
(4) screws
(2) drywall anchors
(1) small “L” bracket
(optional)
Suggested Tools:
Bracket Shelf
min.
installation
15
Make sure that at least one screw will be installed
into wall studs for best results. Use stud finder (not
included) to locate wall studs to hold the
maximum weight.
1
2
3
4
5
Locate wall stud. Slide brackets onto both of the shelves. Install the medium set
screws into the shelf. Cover screw holes with stickers. (You may choose to install the
optional “L” bracket with the small set screw). Place shelf against wall in the desired
location. Use a level to verify that the shelf is level, mark bracket ends and optional
“L” bracket hole.
Mark holes, double check holes with a level and re-mark if necessary.
Install screws into marks with studs, for the marks without a wall stud, use a power drill
and a 3/32” drill bit. Drill holes into the wall at the pencil mark. Insert anchor. Install
screws into the studs (or anchors). Make sure that the screws for the key holes are not
flush against the wall.
Note: If you are drilling into a wall where no studs are available, use the proper
anchors to mount the bracket. Anchors have been provided for this purpose.
Additional drywall anchors may be necessary depending on stud placement.
Choose orientation. This shelf can be hung in either direction. Align keyholes with
screws and then gently pull down on shelf securing it onto the wall.
Install optional “L” bracket installation screw.
Item#
213-4033
Model#
9601053
3/32”
Size Bracket Shelves
36 in 11 lbs
MENARDS.COMM4033 Bracket Shelf E V1