Assembly Instructions

Includes:

(1) shelf

(2) screws

(2) drywall anchors

Suggested Tools:

Stafford Ledge

min.

installation

Locate the wall studs. Place shelf against wall in the desired position. Use a level to

verify that the shelf is level. Mark hole locations above the shelf for each hole on wall

with a pencil. Remove shelf.

Double check holes with a level and re-mark if necessary.

Install screws into marks with studs, for the marks without a wall stud, use a power drill

and a 3/16” drill bit. Drill holes into the wall at the pencil mark. Insert anchor. Install

screws into the studs (or anchors), securing the shelf onto the wall.

Note: If you are drilling into a wall where no studs are available, use the proper

anchors to mount the shelf. Anchors have been provided for this purpose.

Item#

213-4032

Model#

9601052

3/16”

31 in 14 lbs

Size Stafford Ledge

MENARDS.COMM4032 Stafford Ledge E V0

Make sure that at least one screw will be installed

into wall studs for best results. Use stud finder (not

included) to locate wall studs to hold the

maximum weight.

PAGE 1
Item# 213-4032 Model# 9601052 Stafford Ledge Includes: (1) shelf (2) screws (2) drywall anchors Suggested Tools: 3/16” Make sure that at least one screw will be installed into wall studs for best results. Use stud finder (not included) to locate wall studs to hold the maximum weight. 1 2 3 Locate the wall studs. Place shelf against wall in the desired position. Use a level to verify that the shelf is level. Mark hole locations above the shelf for each hole on wall with a pencil. Remove shelf.