Assembly Instructions

Includes:

(1) shelf

(1) mounting bracket

(4) screws

(4) drywall anchors

(2) set screws

Suggested Tools:

Floating Corner Shelf

min.

installation

Locate the wall studs. Place bracket against wall in the desired position. Using a

level and mark holes with a pencil where holes in the mounting bracket meet

the wall.

For the holes without the wall stud, use a power drill and a 3/32” drill bit.

Drill holes into the wall at the pencil mark. Insert anchor.

Line the bracket up with where the wall stud holes are marked, using the drill, install

the screws into the studs (or anchors) to secure the backplate to the wall.

Note: If you are drilling into a wall where no studs are available, use the proper

anchors to mount the bracket. Anchors have been provided for this purpose.

Additional drywall anchors may be necessary depending on stud placement.

Slide shelf onto bracket. Align holes on bottom of the shelf to holes on bracket, then

drive set screws through holes until shelf is secured to the bracket.

Item#

213-4043

Model#

9601045

3/32”

Size Floating Shelves

14 in 17 lbs

MENARDS.COMM4043 Corner Floating Shelf E V0

Make sure that at least one screw will be installed

into wall studs for best results. Use stud finder (not

included) to locate wall studs to hold the

maximum weight.

PAGE 1
Item# 213-4043 Model# 9601045 Floating Corner Shelf Includes: (1) (1) (4) (4) (2) shelf mounting bracket screws drywall anchors set screws Suggested Tools: 3/32” Make sure that at least one screw will be installed into wall studs for best results. Use stud finder (not included) to locate wall studs to hold the maximum weight. 1 Locate the wall studs. Place bracket against wall in the desired position. Using a level and mark holes with a pencil where holes in the mounting bracket meet the wall.