Assembly Instructions

Includes:

(1) shelf

(1) mounting bracket

(4) screws

(2) drywall anchors

(1) set screw

Suggested Tools:

Rustic Bracket Shelf

min.

installation

Locate the wall studs. Place bracket against wall in the desired position. Using a

level mark desired holes for screws with a pencil. Remove bracket.

For the holes without the wall stud, use a power drill and a 3/32” drill bit.

Drill holes into the wall at the pencil mark. Insert anchor.

Line the bracket up with where the wall stud holes are marked, using the drill, install

the screws into the studs (or anchors) to secure the bracket to the wall.

Note: If you are drilling into a wall where no studs are available, use the proper

anchors to mount the bracket. Anchors have been provided for this purpose.

Additional drywall anchors may be necessary depending on stud placement.

Place shelf onto bracket line up hole on shelf with the set screw tab. Install set screw.

Item#

213-4029

213-4030

Model#

9601038

9601039

3/32”

Size Bracket Shelves

24 in 17 lbs

23 lbs36 in

MENARDS.COMM4029 4030 Rustic Bracket Shelf E V0

Make sure that at least one screw will be installed

into wall studs for best results. Use stud finder (not

included) to locate wall studs to hold the

maximum weight.

PAGE 1
Item# 213-4029 213-4030 Model# 9601038 9601039 Rustic Bracket Shelf Includes: (1) (1) (4) (2) (1) shelf mounting bracket screws drywall anchors set screw Suggested Tools: 3/32” Make sure that at least one screw will be installed into wall studs for best results. Use stud finder (not included) to locate wall studs to hold the maximum weight. 1 Locate the wall studs. Place bracket against wall in the desired position. Using a level mark desired holes for screws with a pencil. Remove bracket.