Assembly Instructions

Includes:

(1) shelf

(2) screws

(2) drywall anchors

Suggested Tools:

Mantel Shelf

min.

installation

Make sure that at least one screw will be installed

into wall studs for best results. Use stud finder (not

included) to locate wall studs to hold the

maximum weight.

Locate the wall studs. Place shelf against wall in the desired position. Use a level to

verify that the shelf is level. Draw a horizontal line on each end of shelf on wall with a

pencil.

Rotate the shelf to reveal keyholes. Align shelf against the lines previously marked on

wall and mark holes for keyholes. Remove Shelf Double check holes with a level and

re-mark if necessary.

Install screws into marks with studs, for the marks without a wall stud, use a power drill

and a 3/16” drill bit. Drill holes into the wall at the pencil mark. Insert anchor. Install

screws into the studs (or anchors). Make sure they are not flush against the wall.

Note: If you are drilling into a wall where no studs are available, use the proper

anchors to mount the shelf. Anchors have been provided for this purpose. Additional

drywall anchors may be necessary depending on stud placement.

Align keyholes with screws and then gently pull down on shelf securing it onto the

wall.

Item#

213-4026

Model#

9601026

3/16”

Size Mantel Shelves

24 in 17 lbs

MENARDS.COMM4026 Mantel shelf E V1