Assembly Instructions

Includes:
(1) shelf
(1) mounting bracket
(4) screws
(2) drywall anchors
(2) set screws
Suggested Tools:
Floating Shelf
min.
installation
15
1
2
3
4
Locate the wall studs. Place bracket against wall in the desired position. Verify
the arrow on the bracket is pointing up. Mark desired holes for screws with
a pencil. Remove bracket.
For holes without the wall stud, use a power drill and a 3/32” drill bit.
Drill holes into the wall at the pencil mark. Insert anchor.
Line the bracket up with where the wall stud holes are marked, using the drill, install
the screws into the studs (or anchors) to secure the bracket to the wall.
Note: If you are drilling into a wall where no studs are available, use the proper
anchors to mount the bracket. Anchors have been provided for this purpose.
Additional drywall anchors may be necessary depending on stud placement.
Slide shelf onto bracket. Align holes on bottom of the shelf to holes on bracket tubes,
then drive set screws through holes until shelf is secure to bracket.
Item#
213-4010
213-4013
213-4011
213-4014
213-4012
213-4015
213-4016
213-4017
213-4018
213-4023
213-4024
213-4027
213-4028
213-4039
Model#
9601000
9601001
9601002
9601003
9601004
9601005
9601006
9601007
9601008
9601022
9601023
9601031
9601032
9601062
3/32”
Size Floating Shelves
18 in 10 lbs
17 lbs
17 lbs
17 lbs
24 in
36 in
42 in
MENARDS.COMM4010 4013 4011 4014 4012 4015 4016 4017 4018 4023 4024 4027 4028 4039 Floating Shelf E V1
Make sure that at least one screw will be installed
into wall studs for best results. Use stud finder (not
included) to locate wall studs to hold the
maximum weight.